Long hallway with tiled walls and a glossy floor reflecting overhead fluorescent lights

Commercial Floor Stripping and Waxing: A Practical Guide

Learn when commercial floors need stripping and waxing, how it differs from a scrub and recoat, how the process works, and how to prepare your space.

Date
Nov 17, 2026
Category
Subscribe to our newsletter
Subscribe to our newsletter
Subscribe to our newsletter
Subscribe to our newsletter
Subscribe to our newsletter
Subscribe to our newsletter
Subscribe to our newsletter
Subscribe to our newsletter

Hard floors in a busy building lose their shine long before they wear out. Scuffs build up, the finish turns cloudy, and dirt gets locked into old layers of wax until no amount of mopping makes the floor look clean. For businesses and property managers in Baltimore City, Baltimore County, Towson, Bel Air, and the rest of Harford County, floor stripping and waxing is how you reset that surface without replacing it.

This guide explains what stripping and waxing actually involves, how to tell when your floors need it, how it differs from a lighter scrub-and-recoat, and how to prepare your space so the work goes smoothly.

What Floor Stripping and Waxing Actually Means

Most commercial hard floors, especially vinyl composition tile (VCT) and many sheet vinyl and resilient tile floors, are protected by layers of floor finish, often called wax. That finish takes the daily abuse of foot traffic so the tile underneath doesn't.

Over time, the finish wears unevenly, traps dirt, and yellows. Stripping removes the old finish down to the bare floor. Waxing (more precisely, sealing and finishing) applies fresh protective coats. Buffing or burnishing brings the new surface to an even shine.

Which floors are good candidates

Stripping and waxing is built for resilient hard floors that are designed to carry a finish. It is common in:

  • Office corridors, break rooms, and reception areas with VCT or vinyl tile
  • Retail sales floors and customer-facing spaces
  • Apartment building lobbies, hallways, laundry rooms, and mailrooms with tile floors
  • Rental units with vinyl or tile kitchens and baths during a turnover

Hardwood, laminate, natural stone, and carpet need different care. Hardwood and laminate can be damaged by the water and chemicals used in stripping, and carpet is handled with extraction instead. If you're not sure what your floor is, ask for a walkthrough before scheduling.

Signs Your Floors Need to Be Stripped and Refinished

You don't need a calendar to know a floor is overdue. The floor usually tells you.

  • Dull or cloudy finish that doesn't come back after mopping or buffing
  • Yellowing or dark buildup along walls, in corners, and under doorways where old wax has collected
  • Traffic lanes, visible paths from the entrance to the elevator, front desk, or break room where the finish has worn through
  • Black heel marks and scuffs that are set into the finish rather than sitting on top of it
  • Patchy or uneven shine, often a sign that coats were added over dirty finish
  • White haze near entrances in winter, left by road salt and ice melt tracked in from outside

That last one matters in our region. Salt and slush from winter storms get carried onto entryway tile all season, and the residue dulls the finish fast. Many property managers schedule a full strip and refinish in spring to undo the winter damage, and some add a protective round of coats in late fall before the weather turns.

Strip and Wax vs. Scrub and Recoat

A full strip isn't always the right call.

Scrub and recoat

A scrub and recoat deep-cleans the top layer of finish with a machine scrubber, removes surface dirt and scuffs, and then adds fresh coats over what's left. It's less intensive than a full strip and works well when the finish is dirty and worn on top but still intact underneath.

Full strip and refinish

A full strip is the better choice when the finish has yellowed, built up too thick along the edges, or worn through to bare tile in traffic lanes. Adding new coats over damaged or dirty finish just seals the problem in. Stripping clears everything away so the new finish bonds to a clean floor.

A good floor care plan usually mixes both. Routine maintenance and periodic scrub-and-recoats stretch the time between full strips, which protects the floor and keeps disruption down. For more on how often each type of floor needs attention, see our guide on how often commercial floors should be cleaned.

How the Process Works

A professional strip and wax generally follows this order:

  1. Clear the floor. Furniture, mats, trash cans, displays, and anything else on the floor are moved out of the work area.
  2. Dry clean. The floor is swept or dust-mopped so loose grit doesn't get ground into the surface.
  3. Apply stripper. A floor stripping solution is spread over the floor and given time to break down the old finish.
  4. Scrub. A floor machine with a stripping pad lifts the softened finish. Edges and corners are worked by hand, since that's where old wax builds up the most.
  5. Remove the slurry and rinse. The old finish and solution are picked up, and the floor is rinsed so no residue is left to interfere with the new coats.
  6. Let it dry completely. New finish won't bond properly to a damp floor.
  7. Seal and apply finish. Thin, even coats of sealer and finish are applied, with each coat allowed to dry before the next.
  8. Buff. Once the finish has set, the floor is buffed or burnished to an even, consistent shine.

The amount of time this takes depends on the size of the area, the floor's condition, and how many coats it needs. Your cleaning provider should walk the space and give you a realistic schedule before work begins.

How to Prepare Your Space

A little planning on your end makes the work faster and keeps your business or building running around it.

For businesses and offices

  • Schedule after hours or on a weekend. Floors need to stay off-limits while they're wet and while the finish dries.
  • Clear personal items from under desks and along walls, including cords, boxes, and anything stored on the floor.
  • Tell staff ahead of time which areas will be closed and when they can walk on the floor again.

For apartment buildings and common areas

  • Notify residents in advance with the dates and the areas affected, such as the lobby, hallways, or laundry room.
  • Work in sections so residents always have a path to their units and the exits.
  • Coordinate with other vendors so movers, deliveries, and maintenance crews aren't crossing a freshly finished floor.
  • During a unit turnover, schedule floor work after painting and repairs and before the final clean, so new finish doesn't get scuffed by contractors. Our apartment turnover checklist shows where floors fit in the overall sequence.

Keeping Floors Looking Good After a Refinish

A fresh finish lasts longer when the daily care is right.

  • Use entry mats inside and outside main doors to catch grit, salt, and water before they reach the tile.
  • Dust-mop or sweep daily in busy areas. Grit acts like sandpaper on the finish.
  • Damp-mop with a neutral cleaner. Harsh or high-alkaline cleaners can dull or soften the finish.
  • Clean up spills quickly, especially in break rooms and near vending machines.
  • Schedule periodic buffing to restore shine between deeper services.

Routine sweeping and mopping can be built into commercial office cleaning, and shared lobbies and hallways can be covered by scheduled common area cleaning. If your office has a daily routine but floors aren't on it, our office cleaning checklist is a good place to start.

What to Look for in a Floor Care Provider

When you're comparing providers for stripping and waxing, ask about:

  • Insurance and bonding. Crews may be working after hours in your building with keys and alarm codes.
  • A clear scope. You should know which rooms and floor areas are included, and whether it's a full strip or a scrub and recoat, before work starts.
  • Scheduling flexibility. The work should fit around your business hours or your residents.
  • Ongoing maintenance. A provider who can handle routine floor care between deeper services helps your new finish last.

RLS Cleaning Services has cleaned homes, rental units, and commercial spaces since 2014. We're insured and bonded, we prioritize consistent crews, and our commercial floor cleaning and maintenance service covers stripping, waxing, sealing, buffing, and scheduled upkeep for offices, retail spaces, and apartment buildings.

Get Your Floors Back to a Clean Shine

Whether you manage an office, a storefront, or an apartment community in Baltimore City, Baltimore County, Towson, Bel Air, or Harford County, we can walk your floors with you and recommend whether a full strip and wax or a lighter scrub and recoat makes the most sense.

Request a free quote or walkthrough, call (443) 528-9473, or email Rlong@Rlsclean.com. Tell us the address, the type of floor, and the areas you need done, and we'll put together a clear scope.